Bandsaw Machine

Approx. 2 Lakh / Unit Get Latest Price

Heavy-duty worm reduction gearbox fitted with the bronze worm wheel. All used parts are international standard & Interchangeable with others. User-friendly operation as working height is low so easy to load the job. Automatic switch off after cutting is there. CHB 250 SC Conventional Bandsaw Machine, made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw machine mainly used where the material to be cut only in 90 degrees (straight cutting).

The material you can cut:

• Tubes, Rods, Shafts, Rounds, Rectangles, Square Materials
• Mild Steel, Stainless Steel, Non-Ferrous Metals, Die casting / Gray casting

Main Feature:

• Heavy-duty worm reduction gear box fitted with bronze worm wheel
• All parts used are of international standard & Interchangeable with others
• User-friendly operation as working height is low so easy to load the job
• Automatic switch off after cutting
• Fast cutting speed
• Hydraulic cylinder for up & down feed control
• Auto cooling system during cutting furlong life of blade

Optional-Roller conveyor table, Single roller stand, Bandsaw (blade), Auto feeding arrangement

Approx. 12 Lakh / Piece Get Latest Price

Product Brochure

Cobra CHB 450 S is horizontal bandsaw machine made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw Basically our machine consist of  Heavy Duty  Fabricated base with Frame ( Blade  assembly ), inbuilt  Hydraulic power pack unit  located  at the  bottom of the machine ,  The electrical  control panel cabinet  with  all  reputed  make  electrical  as  per  international  standard  is  provided  at  the  front  side  of  the  machine   for  operator’s  convenience .They are delivered in 100% functional condition.  The oil tank unit will be complete with suction strainer, air breather, oil level indicator, return line filters & Oil Cooling Unit etc.

Approx. 1 Lakh / Piece Get Latest Price

Product Brochure

and highly accurate cutting Band saw, Basically our machine consist of Heavy Duty Fabricated base with Frame (Blade assembly), inbuilt Hydraulic power pack unit located at the bottom of the machine, The electrical control panel cabinet with all reputed make electrical as per international standard is provided at the front side of the machine for operator’s convenience . They are delivered in 100% functional condition. The oil tank unit will be complete with suction strainer, air breather, oil level indicator, return line filters & Oil Cooling Unit etc.

Water Circulation System for Cooling.

Foot Switch for operation.

Model CVB-  600 mm x 900 mm

Approx. 9 Lakh / Unit Get Latest Price

CHB 280S DC Customized Bandsaw Machine specializes in offering customized solutions to the clients. We have a skilled team to design and manufacture customized bandsaw machines with specific features. These are designed with auto feeding arrangements to make metal cutting easy and convenient for clients. From initial concept to final commissioning, we have a solution for all the requirements of valued clients. Customization of machines can be for varied functions like round cuts, flat cuts, and plate sawing. The expert manufacturing team ergonomically designs customized machines to provide maximum satisfaction to clients.

Approx. 6 Lakh / Unit Get Latest Price

Main Feature

• Cutting dia: 250 mm
• DUAL direction mitre cutting
• Hydraulic cylinder feed control
• Cooling system

Starnard Features

• DUAL Direction mitre cutting (+60°, -45°)
• Accuracy: 0.2 mm
• Well known brands electrical components (Schneider, Telemecanique)
• Heavy duty stand with emulsion (cooling) tank
• Cooling system
• Cutting length limiter
• Leveling feet
• 1 x Bimetal blade
• Wire brush for chip removal
• Auto stop after finishing cut
• 12 months warranty against Material / Manufacturing / Design Defects

Cobra CHB 250 C is horizontal bandsaw machine made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw.

Material you can cut

• Tubes, rods, shafts; round, rectangle, square materials.
• Mild steel, Stainless Steel, Non-ferrous metals, Die casting / Gray casting

Optional -Roller conveyors,Support stand, Consumables – limit switch,springs, bearing guides,cleaning brushes etc.

Approx. 6.5 Lakh / Unit Get Latest Price

CHB 450 S Metal Cutting Bandsaw Machine, used for Forging Industry is automatic bandsaw machine made of metal, steel mild steel cutting. Its features are like solid, robust, stable and highly accurate cutting blade frame and metal cutting bandsaw machine.

Specifically designed to cut alloy steel material, semi automatic bandsaw machine offered at Cobra Bandsaw Machines is of unmatched quality. Designed with world class technology and high quality raw materials, semi automatic bandsaw machines are perfect for cutting. Frequency controlled saw drive, long life, easy maintenance and industry leading prices are some of the key features of the machines offered by us.

Main Feature

• Cutting dia:450 mm
• Semi automatic
• Easy to use, Ergonomic control panel
• Full stroke hydraulic material clamping system
• Easy cleanable, portable cooling system
• Manual blade tensioning system with blade breakage safety switch
• High-quality electric components and blade speed control through VFD-Schneider, Omron
• Heavy duty worm reduction Gear box fitted with bronze worm wheel
• All parts used are of international standard
• User friendly operation
• Automatic switch off after cutting .
• Fast Cutting Speed Double Speed Motor
• Cutting diameter of rods : upto 450 mm
• DUAL direction mitre cutting (+60, -60°)
• Hydraulic cylinder for up & down feed control
• Auto Cooling system during cutting for long life of blade

Cobra CHB 450 S is horizontal bandsaw machine made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw.

Material you can cut

• Tubes, rods, shafts; round, rectangle, square materials.
• Mild steel, Stainless Steel, Non-ferrous metals, Die casting / Gray casting

Optional-

• Roller conveyors
• Roller Stands
• Auto Feeding arrangment

Approx. 2.5 Lakh / Unit Get Latest Price

Our Model CHB 250 S Semi Automatic Bandsaw Machines has High quality inbuilt hydraulic power pack is provided to make these functions, this machine can cut at straight and at degrees too which makes it very helpful and useful in the metal fabrication industry.

Features:

• Hydraulic cylinder feed control
• Cooling system
• Semi Automatic ( Hydraulic locking and frame auto lifting   with selected height)
• Hydraulic Powerpack
• DUAL direction miter cutting(+60°, -45°)

Starnard Features

• Semi automatic bandsaw machine
• Accuracy: 0,2 mm
• DUAL Direction mitre cutting (+60°, -45°)
• Accuracy: 0.2 mm
• Well known brands electrical components (Schneider, Telemecanique)
• Hydraulic powerpack ( Nachi or Rexroth Make )
• Hydraulic frame lifting and down feed control
• Hydraulic material clamping
• Heavy duty stand with emulsion (cooling) tank
• Cooling system
• Cutting length limiter scale
• Leveling feet
• 1 x Bimetal blade
• Wire brush for chip removal
• Autolift after cut and hydraulic job clamping
• 12 months warranty against Material / Manufacturing / Design Defects

Description- Horizontal metal cutting bandsaw machines Cobra CHB 250 S is horizontal bandsaw machine made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw.

Material you can cut

• Tubes, rods, shafts; round, rectangle, square materials.
• Mild steel, Stainless Steel, Non-ferrous metals, Die casting / Gray casting

Optional -Roller conveyors, Support stand,chip brush,limit switches, springs, bearing guides etc.

Approx. 6 Lakh / Unit Get Latest Price

CHB 450 A Automatic Bandsaw Machine is fully automatic horizontal bandsaw machine made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting band saw machine This is a very compact and robust 18\" vice feed fully automatic bandsaw of modern design ideally suited to compliment automatic lathes and CNC turning centres with the supply of accurately cut-off parts, as and when required. It also benefits from having a 45° & 60° swivelling head for mitre cutting. Highly recommended for professionals look for machines with latest trends.

Main Feature

• Cutting dia : 250 mm
• Fully automatic with PLC & touch screen for user friendly operation.
• Mitre cutting - (+60°, -45°)
• Hydraulic power pack with Nachi / Eaton / Yuken valves

Material you can cut

• Tubes, rods, shafts; round, rectangle, square materials.
• Mild steel, Stainless Steel, Non-ferrous metals, Die casting / Gray casting

IMPORTANT NOTE: You need to select the adequate blade for every material. We recommend to use COBRA, ANGZI, NACHI for better performance.

Technical Detail-

• Automatic bandsaw machine with PLC & touch screen for user friendly operation .
• Accuracy: 0.2 mm
• DUAL Direction mitre cutting (+60°, -45°)
• Well known brands electrical components
• Hydraulic powerpack
• Hydraulic frame lifting and feed control
• Hydraulic material clamping
• Hydraulic feeding of material
• Heavy duty stand with cooling system
• Cutting length adjustable by PLC Touch panel of Omran, Delta Make
• Leveling feets
• 1 x Bimetal blade
• Wire brush for chip removal
• 3 coat panit finish for longer life
• 12 months warranty against Material / Manufacturing / Design Defects

Approx. 6.5 Lakh / Unit Get Latest Price

Here is the Cobra make CHB 250 A Automatic Bandsaw Machine, which can cut up to 250 mm diameter straight right as well as at angles up to 60 degrees. This machines can be used for mass production in metal working industry. This machine can cut any kind of material.

Features-

• Heavy duty worm reduction Gear box fitted with bronze worm wheel
• All parts used are of international standard & Interchangeable with others 
• DUAL direction mitre cutting(+60°, -45°)
• User friendly operation as working height is low so easy to load the job .
• Fast Cutting Speed
• Cutting diameter of rods : upto 250 mm
• Auto Cooling system during cutting for long life of blade
• Accuracy: 0.2 mm
• Well known brands electrical components
• Hydraulic power pack with Nachi, Eaton, Yuken make
• Heavy duty stand with cooling system
• Hydraulic material clamping, Auto feeding of material
• Cutting length limiter, 1 x Bimetal blade
• Wire brush for chip removal
• 3 coat panit finish for long life
• 12 months warranty against
• Material / Manufacturing / Design Defects

Cobra CHB 250 A are horizontal bandsaw machines made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw machine.

Material you can cut

• Tubes, Rods, Shafts, Rounds, Rectangles, Square Materials.
• Mild steel, Stainless Steel, Non-ferrous metals, Die casting / Gray casting

Optional-

• Roller conveyor Table, Single roller Stand, Bandsaw (Blade),
• Auto Feeding arrangement

Approx. 4 Lakh / Piece Get Latest Price

CVB 500 x 600 x 750 Semi-Automatic Vertical Bandsaw Machine made for metal / board industry professionals. It is solid, robust, stable and highly accurate cutting Band saw, Basically our machine consist of  Heavy Duty Fabricated base with Frame ( Blade assembly), inbuilt Hydraulic power pack unit located at the bottom of the machine, The electrical control panel cabinet with all reputed make electrical as  perinternational standard is provided at the front side of the machine  for  operator’s convenience. They are delivered in 100% functional condition. The oil tank unit will be complete with suction strainer, air breather, oil level indicator, return line filters etc.

Approx. 6.5 Lakh / Unit Get Latest Price

Main Feature

• Heavy duty worm reduction Gear box fitted with bronze worm wheel
• All parts used are of international standard & Interchangeable with others 
• DUAL direction mitre cutting(+60°, -45°)
• User friendly operation as working height is low so easy to load the job .
• Fast Cutting Speed
• Cutting diameter of rods : upto 250 mm
• Auto Cooling system during cutting for long life of blade
• Accuracy: 0.2 mm
• Well known brands electrical components
• Hydraulic power pack with Nachi, Eaton, Yuken make
• Heavy duty stand with cooling system
• Hydraulic material clamping, Auto feeding of material
• Cutting length limiter, 1 x Bimetal blade
• Wire brush for chip removal
• 3 coat panit finish for long life
• 12 months warranty against
• Material / Manufacturing / Design Defects

Cobra CHB 250 A are horizontal bandsaw machines made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw machine.

Material you can cut

• Tubes, Rods, Shafts, Rounds, Rectangles, Square Materials.
• Mild steel, Stainless Steel, Non-ferrous metals, Die casting / Gray casting.

Optional -Roller conveyor Table, Single roller Stand, Bandsaw (Blade), Auto Feeding arrangement

Approx. 3.5 Lakh / Unit Get Latest Price

Semi-Automatic Vertical Bandsaw Machine made for metal /board industry professionals. It is solid, robust, stable and highly accurate cutting Band saw, Basically our machine consist of Heavy Duty Fabricated base with Frame ( Blade assembly ), inbuilt Hydraulic power pack unit located at the bottom of the machine, The electrical control panel cabinet with all reputed make electrical as per international standard is provided at the front side of the machine for operator’s convenience. They are delivered in 100% functional condition. The oil tank unit will be complete with suction strainer, air breather, oil level indicator, return line filters etc.

Approx. 6 Lakh / Unit Get Latest Price

Main Feature

• Heavy duty worm reduction gear box fitted with bronze worm wheel
• All parts used are of international standard & Interchangeable with others
• User friendly operation as working height is low so easy to load the job
• Automatic switch off after cutting
• Fast cutting speed
• Cutting diameter of rods : upto 250 mm
• Hydraulic cylinder for up & down feed control
• Auto cooling system during cutting furlong life of blade

Cobra CHB 250 SC & CHB 250A SC are horizontal handsaw machines made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw machine mainly used where material to be cut only in 90 degree (straight cutting).

Material you can cut

• Tubes, Rods, Shafts, Rounds, Rectangles, Square Materials.
• Mild Steel, Stainless Steel, Non-Ferrous Metals, Die casting / Gray casting.

IMPORTANT NOTE - You need to select the adequate blade for every material. Any blade can be used in our handsaw machines, although we suggest you to use COBRA, NACHI for better performance.

Optional - Roller conveyor table, Single roller stand, Bandsaw (blade), Auto feeding arrangement.

Approx. 47 Lakh / Unit Get Latest Price

Product Brochure
CHB 1500 DC Semi Automatic Bandsaw Machine, is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self-lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads.

This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

The material you can cut

• Manual blade (Band ) tension
• Hydraulic split front vice with full stroke clamping
• Variable hydraulic cutting feed controller
• Auto saw frame height adjustment
• Roller bearing carbide blade guide
• Hydraulic system with reputed valves
• Coolant System
• Electrical control panel box
• Chip removal wire brush
• Step pulley with V-Belt

Main Feature - It is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and released manually (Hydraulic tightening as optional). The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The bandsaw is driven by gear box directly coupled or belt driven with motor having sufficient drive power to cut any kind of material.

This unique vice design permits the workpiece to be automatically indexed. The vice securely clamps the workpiece on both side of the cut thus minimizing drop off burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

Technical Details-

• Variable Speed D.C./A.C. Drive Automatic Chip Conveyor
• Hand Operated Chip Conveyor
• Hydraulic Bundle Clamping Attachment
• Auto/Manually Operated Lubrication System, Job Roller Stand
• Hydraulic Tensioning of saw blade;
• Stepless linear speed of saw blade;
• Saw blade break protection;
• Fast drop protection;

Note:

• Bandsaw blade should be selected as per the geometry and grade of the material so always consult us for better performance of the machine.
• Due to continuous improvement all specifications & design subject to change without any notice or obligations

Approx. 21 Lakh / Unit Get Latest Price

Product Brochure
We are offering CHB 1000 DC Semi Automatic Bandsaw Machine, to our clients. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

The material you can cut

• Manual blade (Band ) tension
• Hydraulic split front vice with full stroke clamping
• Variable hydraulic cutting feed controller
• Auto saw frame height adjustment
• Roller bearing carbide blade guide
• Hydraulic system with reputed valves
• Coolant System
• Electrical control panel box
• Chip removal wire brush
• Step pulley with V-Belt

Main Feature - It is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and released manually (Hydraulic tightening as optional). The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The bandsaw is driven by gear box directly coupled or belt driven with motor having sufficient drive power to cut any kind of material.

This unique vice design permits the workpiece to be automatically indexed. The vice securely clamps the workpiece on both side of the cut thus minimizing drop off burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

Technical Details-

• Variable Speed D.C./A.C. Drive Automatic Chip Conveyor
• Hand Operated Chip Conveyor
• Hydraulic Bundle Clamping Attachment
• Auto/Manually Operated Lubrication System, Job Roller Stand
• Hydraulic Tensioning of saw blade;
• Stepless linear speed of saw blade;
• Saw blade break protection;
• Fast drop protection;

Note:

• Bandsaw blade should be selected as per the geometry and grade of the material so always consult us for better performance of the machine.
• Due to continuous improvement all specifications & design subject to change without any notice or obligations

Approx. 10 Lakh / Unit Get Latest Price

Product Brochure
CHB 650 DC Semi Automatic Bandsaw Machine, is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self-lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and released manually ( Hydraulic tightening as optional). The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The bandsaw is driven by gearbox directly coupled or belt driven with the motor having sufficient drive power to cut any kind of material.

The material you can cut

• Manual blade (Band ) tension
• Hydraulic split front vice with full stroke clamping
• Variable hydraulic cutting feed controller
• Auto saw frame height adjustment
• Roller bearing carbide blade guide
• Hydraulic system with reputed valves
• Coolant System
• Electrical control panel box
• Chip removal wire brush
• Step pulley with V-Belt

Main Feature - It is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and released manually (Hydraulic tightening as optional). The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The bandsaw is driven by gear box directly coupled or belt driven with motor having sufficient drive power to cut any kind of material.

This unique vice design permits the workpiece to be automatically indexed. The vice securely clamps the workpiece on both side of the cut thus minimizing drop off burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

Technical Details-

• Variable Speed D.C./A.C. Drive Automatic Chip Conveyor
• Hand Operated Chip Conveyor
• Hydraulic Bundle Clamping Attachment
• Auto/Manually Operated Lubrication System, Job Roller Stand
• Hydraulic Tensioning of saw blade;
• Stepless linear speed of saw blade;
• Saw blade break protection;
• Fast drop protection;

Note:

• Bandsaw blade should be selected as per the geometry and grade of the material so always consult us for better performance of the machine.
• Due to continuous improvement all specifications & design subject to change without any notice or obligations

Approx. 7.5 Lakh / Unit Get Latest Price

CHB 320A DC (SPM) Customized Bandsaw Machine, specializes in offering customized solutions to the clients. We have the skilled team to design and manufacture customized bandsaw machines with specific features. These are designed with auto feeding arrangements to make metal cutting easy and convenient for clients. From initial concept to final commissioning, we have the solution for all the requirements of valued clients. Customization of machines can be for varied functions like round cuts, flat cuts, and plate sawing. The expert manufacturing team ergonomically designs customized machines to provide maximum satisfaction to clients.

 

Customized Bandsaw Machines:

• Double saw keep the same cutting speed with the sawing
• Automatic adjust cutting feed speed

Approx. 39 Lakh / Unit Get Latest Price

Double Column Bandsaw Machine, is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self-lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and released manually (Hydraulic tightening as optional). The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The bandsaw is driven by gearbox directly coupled or belt driven with the motor having sufficient drive power to cut any kind of material.

The material you can cut:

• Manual blade (Band ) tension
• Hydraulic split front Vice with full stroke clamping
• Variable hydraulic cutting feed controller
• Auto saw frame height adjustment
• Roller bearing carbide blade guide
• Hydraulic system with reputed valves
• Coolant system
• Electrical control panel box
• Chip removal wire brush
• Step pulley with V-Belt

Approx. 6 Lakh / Unit Get Latest Price

We make loading and unloading for the material easy and quick with advanced and moving design of CVB-150 (50x50) Vertical Bandsaw Machine. The design is excellent to cut block, plate and mold steel. Users can easily change a blade.

Key Features:

• Convenient material loading and unloading
• Fast and easy Guide Arm positioning due to hydraulic control
• Convenient placement of easy-to-operate control console
• Easy and quick collection of metal chips due to perfect placement of hydraulic chip auger underneath cutting area

Note:

• Designs are subject to change due to regular improvement
• Customized machines with specific features are also available.

Approx. 7 Lakh / Unit Get Latest Price

We make loading and unloading for the material easy and quick with advanced and moving design of CVB-150 (100x50) Vertical Bandsaw Machine. The design is excellent to cut block, plate and mold steel. Users can easily change a blade.

Key Features:

• Convenient material loading and unloading
• Fast and easy Guide Arm positioning due to hydraulic control
• Convenient placement of easy-to-operate control console
• Easy and quick collection of metal chips due to perfect placement of hydraulic chip auger underneath cutting area

Note:

• Designs are subject to change due to regular improvement
• Customized machines with specific features are also available.

Approx. 60 Lakh / Unit Get Latest Price

CHB 1800 DC Semi Automatic Bandsaw Machine is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self-lubricated bronze bushes.

The material you can cut

• Manual blade (Band ) tension
• Hydraulic split front vice with full stroke clamping
• Variable hydraulic cutting feed controller
• Auto saw frame height adjustment
• Roller bearing carbide blade guide
• Hydraulic system with reputed valves
• Coolant System
• Electrical control panel box
• Chip removal wire brush
• Step pulley with V-Belt

Main Feature - It is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and released manually (Hydraulic tightening as optional). The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The bandsaw is driven by gear box directly coupled or belt driven with motor having sufficient drive power to cut any kind of material.

This unique vice design permits the workpiece to be automatically indexed. The vice securely clamps the workpiece on both side of the cut thus minimizing drop off burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

Technical Details-

• Variable Speed D.C./A.C. Drive Automatic Chip Conveyor
• Hand Operated Chip Conveyor
• Hydraulic Bundle Clamping Attachment
• Auto/Manually Operated Lubrication System, Job Roller Stand
• Hydraulic Tensioning of saw blade;
• Stepless linear speed of saw blade;
• Saw blade break protection;
• Fast drop protection;

Note:

• Bandsaw blade should be selected as per the geometry and grade of the material so always consult us for better performance of the machine.
• Due to continuous improvement all specifications & design subject to change without any notice or obligations

Approx. 35 Lakh / Unit Get Latest Price

We are offering CHB 1300 DC Semi Automatic Bandsaw Machine, to our clients.

The material you can cut

• Manual blade (Band ) tension
• Hydraulic split front vice with full stroke clamping
• Variable hydraulic cutting feed controller
• Auto saw frame height adjustment
• Roller bearing carbide blade guide
• Hydraulic system with reputed valves
• Coolant System
• Electrical control panel box
• Chip removal wire brush
• Step pulley with V-Belt

Main Feature - It is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and released manually (Hydraulic tightening as optional). The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The bandsaw is driven by gear box directly coupled or belt driven with motor having sufficient drive power to cut any kind of material.

This unique vice design permits the workpiece to be automatically indexed. The vice securely clamps the workpiece on both side of the cut thus minimizing drop off burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

Technical Details-

• Variable Speed D.C./A.C. Drive Automatic Chip Conveyor
• Hand Operated Chip Conveyor
• Hydraulic Bundle Clamping Attachment
• Auto/Manually Operated Lubrication System, Job Roller Stand
• Hydraulic Tensioning of saw blade;
• Stepless linear speed of saw blade;
• Saw blade break protection;
• Fast drop protection;

Note:

• Bandsaw blade should be selected as per the geometry and grade of the material so always consult us for better performance of the machine.
• Due to continuous improvement all specifications & design subject to change without any notice or obligations

Approx. 28 Lakh / Unit Get Latest Price

We are offering CHB 1200 D Semi Automatic Bandsaw Machine, to our clients.

The material you can cut

• Manual blade (Band ) tension
• Hydraulic split front vice with full stroke clamping
• Variable hydraulic cutting feed controller
• Auto saw frame height adjustment
• Roller bearing carbide blade guide
• Hydraulic system with reputed valves
• Coolant System
• Electrical control panel box
• Chip removal wire brush
• Step pulley with V-Belt

Main Feature - It is well supported by two rigid hard-chrome plated & ground vertical columns, which are guided by self lubricated bronze bushes. The blade is guided by adjustable bearings & carbide wear pads. The cutting blade can be tightened and released manually (Hydraulic tightening as optional). The blade is hydraulically tightened up to recommended tensile strength of the saw blade. The bandsaw is driven by gear box directly coupled or belt driven with motor having sufficient drive power to cut any kind of material.

This unique vice design permits the workpiece to be automatically indexed. The vice securely clamps the workpiece on both side of the cut thus minimizing drop off burrs. This design is most suitable for nesting or bundle cutting and is ideal for cutting short length pieces.

Technical Details-

• Variable Speed D.C./A.C. Drive Automatic Chip Conveyor
• Hand Operated Chip Conveyor
• Hydraulic Bundle Clamping Attachment
• Auto/Manually Operated Lubrication System, Job Roller Stand
• Hydraulic Tensioning of saw blade;
• Stepless linear speed of saw blade;
• Saw blade break protection;
• Fast drop protection;

Note:

• Bandsaw blade should be selected as per the geometry and grade of the material so always consult us for better performance of the machine.
• Due to continuous improvement all specifications & design subject to change without any notice or obligations

Approx. 7 Lakh / Unit Get Latest Price

We are offering CHB 420 A DC Automatic Bandsaw Machine, to our clients.

Main Feature

• Tubes, rods, shafts; round, rectangle, square materials.
• Mild steel, Stainless Steel, Non-ferrous metals, Die casting / Gray casting

Description

• Automatic bandsaw machine with PLC & touch screen for user friendly operation - OMRON / DELTA MAKE
• Accuracy: 0.1 TO 0.2 mm
• Schneider brands electrical components
• Hydraulic powerpack- Nachi / Eaton/ Yuken make
• Hydraulic frame lifting and feed control
• Hydraulic material clamping
• Hydraulic feeding of material
• Auto stop incase blade crack
• Heavy duty stand with emulsion (cooling) tank
• Cooling system
• Cutting length adjustable by PLC Touch panel , minimum scale -0.1 mm
• Leveling feet
• 1 x Bimetal blade
• Wire brush for chip removal
• 3 coat panit finish
• 12 months warranty against Material / Manufacturing / Design Defects

Nesting Fixture/Bundle Clamping

A nesting fixture set consists of hydraulically operated vertical clamps which are mounted on the rear and front vices. This makes it possible to cut multiple pieces at a time.

Hydraulic Split Front Vice with Full Stroke Clamping

• Variable Hydraulic Cutting Feed Controller
• Auto Saw Frame Height Adjustment
• Roller Bearing Carbide Blade Guide
• Hydraulic System with reputed valves
• Coolant System
• Electrical control Panel box
• Chip Removal Wire Brush
• Step Pulley With V-Belt
• Bi-metal Bandsaw Blade 1 No.

Note:

• Bandsaw blade should be selected as per the geometry and grade of the material so always consult us for better performance of the machine.
• Due to continuous improvement all specifications & design subject to change without any notice or obligations

Approx. 10 Lakh / Unit Get Latest Price

We are engaged in offering CHB 350 A DC Automatic Bandsaw Machine With PLC.

Feature:

• PLC & touch screen for user-friendly operation - Omron/Delta make
• Schneider brands electrical components
• Hydraulic powerpack nachi/Eaton/Yuken make
• Hydraulic frame lifting and feed control
• Hydraulic material clamping
• Hydraulic feeding of material
• Auto stop incase blade crack
• Heavy duty stand with emulsion (cooling) tank
• Cooling system
• Cutting length adjustable by PLC touch panel
• Leveling feet

Approx. 9 Lakh / Unit Get Latest Price

We are engaged in offering CHB 520 A DC Automatic Bandsaw Machine, nesting fixture set consists of hydraulically operated vertical clamps which are mounted on the rear and front vices. This makes possible to cut multiple pieces at a time.

Main Feature

• Automatic bandsaw machine with PLC & touch screen for user friendly operation - Omron / Delta make
• Accuracy 0.1 to 0.2 mm
• Schneider brands electrical components
• Hydraulic powerpack Nachi/Eaton/Yuken make
• Hydraulic frame lifting and feed control
• Hydraulic material clamping
• Hydraulic feeding of material
• Auto stop incase blade crack
• Heavy duty stand with emulsion (cooling) tank
• Cooling system
• Cutting length adjustable by PLC Touch panel, minimum scale : 0.1 mm
• Leveling feet
• 1 x Bimetal blade
• Wire brush for chip removal
• 3 coat paint finish
• 12 months warranty against material / manufacturing /design defects

A nesting fixture set consists of hydraulically operated vertical clamps which are mounted on the rear and front vices. This makes possible to cut multiple pieces at a time.

Standard Accessories

• Manual blade (band) tension hydraulic split front vice with full stroke clamping
• Variable hydraulic cutting feed controller
• Auto saw frame height adjustment
• Roller bearing carbide blade guide
• Hydraulic system with reputed valves
• Coolant system
• Electrical control panel box
• Chip removal wire brush
• Step pulley with V-belt
• Bi-metal bandsaw blade 1 no.

Extra Accessories

• Variable speed D.C./A.C. drive
• Automatic chip conveyor
• Hand operated chip conveyor
• Hydraulic bundle clamping attachment
• Auto / manually operated lubrication

Other Details

• Tubes, Rods, Shafts, Round, Rectangle, Square materials
• Mild steel, Stainless steel, Non-ferrous metals, Die casting / Gray casting

Optional -

• Job roller stand
• Hydraulic tensioning of saw blade
• Stepless linear speed of saw blade
• Saw blade break protection
• Fast drop protection
• Automatic hydraulic chip removal device

Approx. 22 Lakh / Piece Get Latest Price

Approx. 2.5 Lakh / Unit Get Latest Price

Santec Cobra is a leading company engaged in the manufacturing, supplying and export of horizontal Metal Cutting Semi Automatic Bandsaw Machine. Santec's bandsaw machines are known for their robust construction, high accuracy, and unmatched finish. The semiautomatic horizontal bandsaw machine is another feather in our cap that is manufactured keeping in mind the growing requirement of experts from metal industry who now demanding highly accurate metal cutting machine.

Standard features of Metal Cutting Semi Automatic Bandsaw Machine:

• The machine offers a high accuracy of 0.2 mm during metal cutting
• The machine also offers DUAL direction miter cutting (+ 60° and - 45°)
• The electrical components used during the manufacturing process are supplied by well-known brands in the industry
• The machine has a hydraulic power pack
• The machine has a hydraulic frame lifting and feed control
• The machine also offers a hydraulic material clamping
• The machine has a heavy duty stand with emulsion (cooling) tank
• The machine has a cooling system
• The machine has a cutting length limiter and leveling feet
• The machine uses a 1 x Bimetal blade for cutting

Main Feature

• Cutting dia:450 mm
• Semi automatic
• Easy to use, Ergonomic control panel
• Full stroke hydraulic material clamping system
• Easy cleanable, portable cooling system
• Manual blade tensioning system with blade breakage safety switch
• High-quality electric components and blade speed control through VFD-Schneider, Omron
• Heavy duty worm reduction Gear box fitted with bronze worm wheel
• All parts used are of international standard
• User friendly operation
• Automatic switch off after cutting .
• Fast Cutting Speed Double Speed Motor
• Cutting diameter of rods : upto 450 mm
• DUAL direction mitre cutting (+60, -60°)
• Hydraulic cylinder for up & down feed control
• Auto Cooling system during cutting for long life of blade

Description- Cobra CHB 450 S is horizontal bandsaw machine made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw.

Material you can cut

• Tubes, rods, shafts; round, rectangle, square materials.
• Mild steel, Stainless Steel, Non-ferrous metals, Die casting / Gray casting

Optional-

• Roller conveyors
• Roller Stands
• Auto Feeding arrangment