Cobra CHB 250S is Horizontal Band Saw Machine made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting Band saw Basically our machine consist of Heavy Duty Fabricated base with Frame ( Blade  assembly ), inbuilt  Hydraulic power pack unit  located  at the  bottom of the machine ,  The electrical  control panel cabinet  with  all  reputed  make  electrical  as  per  international  standard  is  provided  at  the  front  side  of  the  machine   for  operator’s  convenience   .  They are delivered in 100% functional condition.  The oil tank unit will be complete with suction strainer, air breather, oil level indicator, return line filters & Oil Cooling Unit etc.

Heavy-duty worm reduction gearbox fitted with the bronze worm wheel. All used parts are international standard & Interchangeable with others. User-friendly operation as working height is low so easy to load the job. Automatic switch off after cutting is there. CHB 250 SC Conventional Bandsaw Machine, made for metal industry professionals. It is solid, robust, stable and highly accurate metal cutting bandsaw machine mainly used where the material to be cut only in 90 degrees (straight cutting).

The material you can cut:

Basically our machine consist of a Fabricated ‘C’ frame type stress relieved structure, inbuilt Hydraulic power pack

unit (Top of the Press),The machine is built according to the International Guidelines. They are delivered in 100% functional condition. In the following, please find further technical elements:

General:

Before despatch of your machine, we will carry out extensive tests, which we consider as a company internal

acceptance trial” and which guarantees you the quality of the product Also included are manual-book for basic

machine operation, maintenance hydraulic and electrical schematics as well as a spare part  list.

Limitations:

SANTEC does not provide foundations, platforms, oil fillings, connection to water, and electrical lines.

SANTEC machine is equipped with loading and unloading support devices when dispatched, These devices help

you to handle the heavy machine parts easily and place them at your site

The NC series Pipe bending machine equipped with NC control unit. It combines easy-to-use operation with high bending accuracy and cost effectiveness. It is the practical semi-automatic solution for small to medium productions.

Basically our machines consist of a fabricated stress relieved structure, inbuilt Hydraulic power pack unit (back side of the Press). The machine is built as per the International Guideline. They are delivered in 100% functional condition.

In the following, please find further technical elements:

Hydraulic Seals in the Cylinders:  All imported seal kit with wiper, rod seal, guide or wear rings, step seal, piston seals, O-rings will be used for trouble free operation of the press.

General:

Before despatch of your machine, we will carry out extensive tests, which we consider as a company internal acceptance trial” and which guarantees you the quality of the product Also included are manual-book for basic machine operation, maintenance hydraulic and electrical schematics as well as a spare part list.

Cylinder/Ram:- Cylinders manufactured out of ultrasonically tested high quality imported Seamless tube  of  ST-52  grade. , Tensile strength 650 N/mm2.

v  All cylinders bores will be machined & finish  in  case of  double acting   cylinders.

v  Most efficient  & reliable seal kit directly imported from  Germany , USA & Korea consisting of  wiper , PU -Rod seal  , Tercite Step seal , PTFE + Bronze  Guide rings , Teflon  backup rings , O-Rings   chevron or twin set fiber reinforced oil resistant polyurethane/nylon   seals used in the glands  & piston seals for leak proof performance.

v  Ram itself  is  ground  to a  high  degree  of  finish   &  then hardchrome plated  to  50RC  for  long life of seals & corrosion resistance.

v  The  wiper  seals provided at the  tip of the  cylinder  neck  prevents dirt  from entering   into the  hydraulic  cylinder.

Cylinder/Ram:- Cylinders manufactured out of ultrasonically tested high quality imported Seamless tube  of  ST-52  grade. , Tensile strength 650 N/mm2.

v  All cylinders bores will be machined & finish  in  case of  double acting   cylinders.

v  Most efficient  & reliable seal kit directly imported from  Germany , USA & Korea consisting of  wiper , PU -Rod seal  , Tercite Step seal , PTFE + Bronze  Guide rings , Teflon  backup rings , O-Rings   chevron or twin set fiber reinforced oil resistant polyurethane/nylon   seals used in the glands  & piston seals for leak proof performance.

v  Ram itself  is  ground  to a  high  degree  of  finish   &  then hardchrome plated  to  50RC  for  long life of seals & corrosion resistance.

v  The  wiper  seals provided at the  tip of the  cylinder  neck  prevents dirt  from entering   into the  hydraulic  cylinder.

Cobra provides high quality and heat resistant bandsaw blades. We are a leading manufacturer and exporter of bandsaw machines and blades. These long lasting blades are perfect for both wood and metal. We also offer customized solutions to help clients get better performance and finish in the products.

We deal in different bandsaw cutting blades like: